Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator and Fan on the Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Radiator

In this video, follow the step-by-step instructions to remove and replace the radiator and fan on a 2013 Ford Fiesta MK6. First, open the bonnet of your car and remove the air filter box, then take off the intake duct; next, disconnect the mass air flow sensor and remove the coolant hose, allowing it to drain into a container. At this point, unscrew all the screws securing the fan, disconnecting the electrical connector; once removed, unscrew the radiator screws for removal!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the radiator fan of the Ford Fiesta
Replacement of the radiator fan of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Let's discover the process of disassembling and replacing the radiator cooling fan of the Ford Fiesta. First, open the hood of the car and start by r…
How to Remove the Radiator Fan from a Ford Fiesta
How to Remove the Radiator Fan from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you begin, open the front bonnet of your Ford Fiesta. Start by removing the air filter housing and the associated hoses by unscrewing the resp…
How to Remove the Radiator Fan on a Ford Fiesta?
How to Remove the Radiator Fan on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial, you will see how to remove the radiator fan on a Ford Fiesta, a very simple and quick operation. First, ensure that the key is not …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos