Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Camshaft Position Sensor on a Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Crankshaft position sensor

See other generations:
Video tutorial

In this video, you will learn how to remove and replace the camshaft position sensor on the sixth generation Ford Fiesta, ST version. First, open the bonnet and remove the upper cover; then disconnect the battery terminals, as shown in the video.

Next, disconnect the air filter box hose by unscrewing the clip screws and disconnecting the mass airflow sensor; then disconnect the various upper electrical connectors, including those from the rail. Use a socket spanner to unscrew the sensor bolts, following the video until the end!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Replacing Camshaft Sensor on Ford Fiesta 1.4 TDCi
Replacing Camshaft Sensor on Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video, learn how to remove and replace the camshaft speed sensor on a Ford Fiesta 1.4 TDCi. First, open the bonnet of your car and disconnect…
Camshaft Installation Instructions
Camshaft Installation Instructions
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) When replacing the camshaft, it is recommended to also install a new so-called pedestal, consisting of the spherical head pins and the valve push rod…
Where is the crankshaft position sensor located on the Ford Fiesta?
Where is the crankshaft position sensor located on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) This video shows where the crankshaft position sensor is located on the Ford Fiesta and how to proceed if you need to replace it. As shown, the senso…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos