Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the crankshaft position sensor located on the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Crankshaft position sensor

See other generations:
Video tutorial

This video shows where the crankshaft position sensor is located on the Ford Fiesta and how to proceed if you need to replace it. As shown, the sensor is positioned at the lower right side of the engine and is accessible from the right wheel arch. To access it, you will need to lift the vehicle, taking all necessary safety precautions, and then remove both the wheel and the inner arch liner.

To remove the sensor, simply unscrew the single fastening bolt with an 8mm socket and then disconnect the connector.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

Replacing the Camshaft Position Sensor on a Ford Fiesta MK6
Replacing the Camshaft Position Sensor on a Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video, you will learn how to remove and replace the camshaft position sensor on the sixth generation Ford Fiesta, ST version. First, open the…
Replacing Camshaft Sensor on Ford Fiesta 1.4 TDCi
Replacing Camshaft Sensor on Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video, learn how to remove and replace the camshaft speed sensor on a Ford Fiesta 1.4 TDCi. First, open the bonnet of your car and disconnect…
Where is the air pressure sensor located in the Ford Fiesta?
Where is the air pressure sensor located in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, you will see where the air pressure sensor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple a…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos