Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the air pressure sensor located in the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Checks and maintenance

In this video, you will see where the air pressure sensor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple and quick operation. As shown, the sensor is positioned at the top of the engine, right in the air filter housing. To remove it and subsequently replace it, first open the bonnet, then disconnect the relevant power connector, and using a Torx key, unscrew the single fixing bolt. To install the replacement, simply follow the reverse procedure.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil Pressure Sensor of the Ford Fiesta
How to Replace the Engine Oil Pressure Sensor of the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This guide outlines the steps to dismantle and replace the engine oil pressure sensor of the Ford Fiesta with a petrol engine. First, open the bonnet…
How to Clean the MAF Sensor on a 2003 Ford Fiesta
How to Clean the MAF Sensor on a 2003 Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) If you notice engine performance issues, especially during acceleration, it is likely that the MAF (Mass Air Flow) sensor may be damaged. This sensor…
How to Replace the Oil Pressure Sensor on a Ford Fiesta
How to Replace the Oil Pressure Sensor on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, see how to remove/reinstall the oil pressure bulb on a Ford Fiesta. Lift the bonnet and secure it, then remove the plastic soundproofi…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos