Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Pressure Sensor on a Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023

In this video, see how to remove/reinstall the oil pressure bulb on a Ford Fiesta. Lift the bonnet and secure it, then remove the plastic soundproofing panel located on the engine. Identify the relevant wiring, disconnect the two ends of the connectors, and unscrew the sensor with a socket spanner. Once the sensor is removed, compare it with the new one, then prepare to install it in the engine compartment. Screw the pressure sensor into its housing, reconnect the connectors, and reinstall the soundproofing panel. Finally, test the installed part.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil Pressure Sensor of the Ford Fiesta
How to Replace the Engine Oil Pressure Sensor of the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This guide outlines the steps to dismantle and replace the engine oil pressure sensor of the Ford Fiesta with a petrol engine. First, open the bonnet…
Where is the air pressure sensor located in the Ford Fiesta?
Where is the air pressure sensor located in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, you will see where the air pressure sensor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple a…
What does it mean when the tire pressure sensor is not detected on a Ford Fiesta?
What does it mean when the tire pressure sensor is not detected on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video we see what the message "tire sensor not detected" on a Ford Fiesta can mean. The TPMS of our car is not receiving the signal from one …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos