Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Pressure Sensor of the Ford Fiesta

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

This guide outlines the steps to dismantle and replace the engine oil pressure sensor of the Ford Fiesta with a petrol engine. First, open the bonnet of your car and begin removing the upper plastic cover by disconnecting the intake hose (unscrewing the clamp screw); then you will find the oil pressure sensor at the bottom, as shown in the video.

Now disconnect the electric connector and use a socket or star spanner to remove and replace the sensor with the new one, tightening it and reconnecting it!


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Pressure Sensor on a Ford Fiesta
How to Replace the Oil Pressure Sensor on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, see how to remove/reinstall the oil pressure bulb on a Ford Fiesta. Lift the bonnet and secure it, then remove the plastic soundproofi…
Where is the air pressure sensor located in the Ford Fiesta?
Where is the air pressure sensor located in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, you will see where the air pressure sensor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple a…
Replacing the ABS Sensor on a Ford Fiesta
Replacing the ABS Sensor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Replacing the ABS sensor on a Ford Fiesta? Let's see how to disassemble the part. Lift the car with a jack, unscrew the wheel bolts with a socket spa…

    Frequently Asked Questions

    • Fiesta 1996-2002 - How to replace the ignition lock on a Ford Fiesta? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos