Do it yourself
Frequently asked questions about cars and motorcycles

Does the Ford Ecoboost 1.0 125Hp Engine Consume Oil?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Engine oil

See other generations:
Video tutorial

The 1.0 Ecoboost 125 Hp engine typically does not consume oil significantly, as confirmed by the YouTuber. However, a small number of these engines, under certain conditions or due to known defects, may develop higher than normal oil consumption.

The video provides excellent empirical evidence; after 10,000 miles, the oil remains clear and is only 1/4 below the maximum, indicating normal consumption. There are also some units produced between 2012 and 2015 that have shown issues with piston ring seals or head gasket seals.

Generally, this small engine dislikes running cold, so very short trips where the oil does not reach operating temperature are detrimental. Always perform service strictly on schedule with the oil recommended by Ford, avoid stressing the engine with too many short trips, and frequently check the oil level.


Posted on 8 August 2026 by ScegliAuto


Related tutorials

Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, we see a 2017 Ford Fiesta 1.0 Ecoboost with a timing belt immersed in oil. In fact, Ford has also produced engines with this controver…
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, the YouTuber is amazed by the fact that Ford has also succumbed to the allure of the oil-bath belt on the 1.0/1.5 3-cylinder Ecoboost …
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today's instructions will allow us to disassemble and replace the timing belt of the Ford Fiesta 1.0 Ecoboost. First, we open the hood of the car and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos