Do it yourself
| ||||
|
Ford Fiesta - Video tutorial
Model: Ford Fiesta
MK 6, MK VI, Fiesta 6
- Years 2008-2017 Replacing the ABS sensor on a Ford Fiesta? Let's see the disassembly of the piece. We lift the car with a jack, unscrew the wheel pins with a telescopic wrench and (compressed air drill) pull it off. We begin to unscrew the locking pins of the ABS sensor (located above near the brake disc). We disassemble the plastic stone guard and disconnect the power supply terminals inside the fender. With a screwdriver we detach the clips that hold the cables. We mount the new ABS sensor and mount the stone guard with the rim. We test the functioning of the part mounted on the Ford Fiesta.
Posted on 14 December 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |