Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pedal Sensor on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Clutch

In this tutorial, see how to replace the clutch pedal sensor on a Ford Fiesta, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by positioning yourself under the dashboard on the driver's side, then locate the sensor at the base of the pedal on the right side. Next, release the rear fixing clip by pressing it inward, separate the sensor from the bracket, and disconnect the connector. To fit the replacement, simply follow the reverse procedure.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pedal Pump on the Ford Fiesta?
How to Replace the Clutch Pedal Pump on the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the clutch pedal pump, you need to remove the old pump, taking care with the lever connected to the pedal. To insert the new pump with the…
How to Replace the Clutch Pedal Pump on a Ford Fiesta?
How to Replace the Clutch Pedal Pump on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the clutch pedal pump on a Ford Fiesta, remove the carpet located in the driver's footwell, behind the pedals. This will provide access to…
How do you replace the clutch of the Ford Fiesta?
How do you replace the clutch of the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To ensure that the clutch replacement on the Ford Fiesta takes place, it will be necessary to lift the car so that it is possible to unscrew the bolt…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos