Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Camshaft Sensor on Ford Fiesta 1.4 TDCi

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Crankshaft position sensor

In this video, learn how to remove and replace the camshaft speed sensor on a Ford Fiesta 1.4 TDCi. First, open the bonnet of your car and disconnect the electrical connector of the sensor by pressing the tab with something thin like a flat screwdriver. Next, unscrew the fastening bolts using a ratchet Torx key, as shown in the video. Finally, remove the sensor and replace it with the new one, using the original part; then apply the reverse procedure of disassembly!

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Camshaft Position Sensor on a Ford Fiesta MK6
Replacing the Camshaft Position Sensor on a Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, you will learn how to remove and replace the camshaft position sensor on the sixth generation Ford Fiesta, ST version. First, open the…
Replacing the Fuel Filter of the Ford Fiesta 1.5 TDCi
Replacing the Fuel Filter of the Ford Fiesta 1.5 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Below are the instructions for removing and replacing the fuel filter of the Ford Fiesta 1.5 TDCi. First, open the bonnet of the vehicle and start di…
Replacing the ABS Sensor on a Ford Fiesta
Replacing the ABS Sensor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the ABS sensor on a Ford Fiesta? Let's see how to disassemble the part. Lift the car with a jack, unscrew the wheel bolts with a socket spa…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos