Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you clean the MAF sensor on a Ford Ecosport MK1?

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: MAF sensor

In this video, we see how to clean the MAF (Mass Air Flow) sensor, which is used to measure the air entering the engine. It is also called a "air flow meter", a term that emphasizes the measurement of air flow, while the term MAF focuses more on the measurement of air mass. On the Ecosport, this device is easily accessible. If we open the front hood, we can find it on the right side, near the grille: we will need to remove the electrical connector and lift the device after unscrewing the holding screw, which we will clean with a specific spray like the one shown in the video, available on Amazon with the code B00295EEBK for 11.09 euros, with free delivery for Prime customers. Afterwards, we just need to put it back in place, tighten the screw, and reconnect the electrical connector.

Posted on 17 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Ford EcoSport Mk1
How to Replace the Cabin Air Filter on a Ford EcoSport Mk1
Ford Ecosport (2012-2023 / BK, MK 1) This guide shows how to remove and clean the cabin filter of the Ford EcoSport Mk1. First, move the passenger seat all the way back and detach the cl…
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…
DIY on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) One thing that not many people know, which is part of DIY, is that on the Ford Ecosport, as well as on other Ford models, there is a hidden secret me…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos