Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Disc on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Brake rotors

See other generations:
Video tutorial

Before you begin, lift the car and remove the rear wheel. Once the wheel is off, start by loosening and removing the bolts that secure the brake pads, then remove the brake caliper.

At this point, unscrew and remove the bolt on the hub of the disc using a Torx T47. After that, using a hammer, extract and remove the old disc. This completes the removal of the brake disc.

To fit the new disc, simply follow the steps in reverse, and you will be finished. It is advisable to replace the discs in pairs; when replacing the right disc, also replace the left one and vice versa, to avoid compromising braking performance.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Remove the Handbrake Cable on a Ford Mondeo
How to Remove the Handbrake Cable on a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Remove the handbrake cable on a Ford Mondeo if faulty. Here’s how to do it. Position your car on a column lift, loosen the bolts with a telescopic sp…
Replacing Rear Brake Pads on Ford Mondeo 4
Replacing Rear Brake Pads on Ford Mondeo 4
Ford Mondeo / Fusion (2014-2021 / MK 4) Loosen the bolts of the affected rear wheel, lift the car with a jack, and completely unscrew them to remove the wheel. Unscrew the two 13 mm bolts f…
How to Remove the Wheel Bearing on Ford Mondeo
How to Remove the Wheel Bearing on Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Here's how to remove a wheel bearing on a Ford Mondeo. Position the car on a column lift, loosen the bolts with a socket wrench, and raise it to a co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos