Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Handbrake Cable on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Parking brake

See other generations:
Video tutorial

Remove the handbrake cable on a Ford Mondeo if faulty. Here’s how to do it. Position your car on a column lift, loosen the bolts with a telescopic spanner, and raise it to a comfortable height for access.

Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket, reaching inside the brake disc to disconnect the handbrake cable. Now disconnect the handbrake cable and unscrew the bolts located under the car's body.

Fit the new handbrake cable as shown in the video. Refit the wheel and tighten the securing bolts.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Replace the Handbrake Cable on a Ford Mondeo?
How to Replace the Handbrake Cable on a Ford Mondeo?
Ford Mondeo / Fusion (2000-2007 / MK 2) To replace the handbrake cable on a Ford Mondeo, lift the car with a jack or ramp to access the bolts securing the right rear wheel. Once this wheel …
How to Replace the Handbrake in the Ford Mondeo?
How to Replace the Handbrake in the Ford Mondeo?
Ford Mondeo / Fusion (2000-2007 / MK 2) To replace the handbrake in the Ford Mondeo, loosen the screws securing all the trim panels of the centre console. Once these panels are removed, you…
Replacing the Brake Discs and Rear Pads
Ford Mondeo / Fusion (2007-2014 / MK 3) Lift the vehicle and remove the rear wheel; using a C-clamp, disengage the handbrake cable and continue by removing the brake caliper support, extrac…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos