Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handbrake Cable on a Ford Mondeo?

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Parking brake

See other generations:
Video tutorial

To replace the handbrake cable on a Ford Mondeo, lift the car with a jack or ramp to access the bolts securing the right rear wheel. Once this wheel is removed, you can access the cable that needs to be disconnected from the brake caliper.

Then, from underneath the car, detach the silencer from the bracket, thus disconnecting the handbrake cable. This will allow you to fit the new handbrake cable by securing it and adjusting its tension.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Remove the Handbrake Cable on a Ford Mondeo
How to Remove the Handbrake Cable on a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Remove the handbrake cable on a Ford Mondeo if faulty. Here’s how to do it. Position your car on a column lift, loosen the bolts with a telescopic sp…
How to Replace the Handbrake in the Ford Mondeo?
How to Replace the Handbrake in the Ford Mondeo?
Ford Mondeo / Fusion (2000-2007 / MK 2) To replace the handbrake in the Ford Mondeo, loosen the screws securing all the trim panels of the centre console. Once these panels are removed, you…
Replacing Rear Brake Pads on Ford Mondeo 4
Replacing Rear Brake Pads on Ford Mondeo 4
Ford Mondeo / Fusion (2014-2021 / MK 4) Loosen the bolts of the affected rear wheel, lift the car with a jack, and completely unscrew them to remove the wheel. Unscrew the two 13 mm bolts f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos