Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Injectors of the Ford Mondeo 2.0 TDCi

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Fuel injectors

This guide will show you the main steps to remove and replace the petrol injectors of the Ford Mondeo 2.0 TDCi. First, open the bonnet of your car and start removing the upper engine cover; disconnect the metal pipe of the injectors to gain access, unplugging the electrical connector of the injectors. At this point, use a socket spanner with an extension to unscrew and remove the injector, as shown in the video; replace it with a new one if damaged, applying the reverse procedure for reassembly!

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Injectors on the Ford Mondeo MK2 2.0 TDCI
How to Replace the Injectors on the Ford Mondeo MK2 2.0 TDCI
Ford Mondeo / Fusion (2000-2007 / MK 2) In today's video, you will see how to remove and replace the diesel injectors on the second series Ford Mondeo with a 2.0 TDCI engine. First, open th…
How to remove the injector from a Ford Mondeo TDCi MK3
How to remove the injector from a Ford Mondeo TDCi MK3
Ford Mondeo / Fusion (2000-2007 / MK 2) Let's see how to remove the injector from a Ford Mondeo TDCi MK3: we start by disconnecting the electrical connectors of the injectors, then we remov…
Replacing Injectors on a Ford Mondeo 1.8 TDCi
Replacing Injectors on a Ford Mondeo 1.8 TDCi
Ford Mondeo / Fusion (2000-2007 / MK 2) In this tutorial video, you will see the instructions on how to remove and replace the injectors on a Ford Mondeo 1.8 TDCi. First, open and lift the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos