Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Injectors on a Ford Mondeo 1.8 TDCi

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Fuel injectors

In this tutorial video, you will see the instructions on how to remove and replace the injectors on a Ford Mondeo 1.8 TDCi. First, open and lift the bonnet and remove the plastic protective cover; then remove the retaining clips from the metal pipes connecting the high pressure to the injectors and subsequently use a spanner to undo their nuts. Once you have disconnected the pipes, remove the injectors by undoing them with a socket spanner: disconnect them from the upper pipe and proceed with the replacement. Follow the same procedure for the remaining injectors.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Injectors of the Ford Mondeo 2.0 TDCi
Replacing the Diesel Injectors of the Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2007-2014 / MK 3) This guide will show you the main steps to remove and replace the petrol injectors of the Ford Mondeo 2.0 TDCi. First, open the bonnet of your car an…
How to Replace the Injectors on the Ford Mondeo MK2 2.0 TDCI
How to Replace the Injectors on the Ford Mondeo MK2 2.0 TDCI
Ford Mondeo / Fusion (2000-2007 / MK 2) In today's video, you will see how to remove and replace the diesel injectors on the second series Ford Mondeo with a 2.0 TDCI engine. First, open th…
How to Remove the Fuel Injectors of the Ford Mondeo 2.0 TDCI
How to Remove the Fuel Injectors of the Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) In this brief and simple video, you will see how to remove and replace the fuel injectors of the Ford Mondeo with a 2.0 TDCI engine. First, open the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos