Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Injector Return Pipe O-Ring

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuel injectors

See other generations:
Video tutorial

Open the front bonnet, remove the plastic cover above the engine, and disconnect the injector power connectors. At the top of the injector, there is a metal pipe secured with a nut, while at the bottom, there is a rubber tube held in place by pressure, sealed with a specific O-ring gasket.

Using a pair of bent-nose pliers, pull back the tube by grasping the plastic tab: halfway along the injector's seating, there is an O-ring that ensures the seal; to remove it, it is suggested to use a pick.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Injectors of the Ford Mondeo 2.0 TDCi
Replacing the Diesel Injectors of the Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2007-2014 / MK 3) This guide will show you the main steps to remove and replace the petrol injectors of the Ford Mondeo 2.0 TDCi. First, open the bonnet of your car an…
How to remove the injector from a Ford Mondeo TDCi MK3
How to remove the injector from a Ford Mondeo TDCi MK3
Ford Mondeo / Fusion (2000-2007 / MK 2) .. holes with clean cloths to prevent dirt from entering. The seals and fastening bolts must always be replaced... …
How to Replace the Injectors on the Ford Mondeo MK2 2.0 TDCI
Ford Mondeo / Fusion (2000-2007 / MK 2) In today's video, you will see how to remove and replace the diesel injectors on the second series Ford Mondeo with a 2.0 TDCI engine. First, open th…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos