Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Immobiliser on a Ford Mondeo MK3

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, you will see the necessary instructions to reset the immobiliser and start the vehicle on the third series Ford Mondeo in simple and quick steps. First, open the bonnet of your car and start by removing the battery terminals using a 10 mm socket; then disconnect the indicated bolt on the right side of the battery using a 13 mm spanner, as shown in the video.

At this point, repeat the operation three times to reset the electronic immobiliser; then check the engine ignition!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Disable the Immobiliser on a 2007 Ford Mondeo
How to Disable the Immobiliser on a 2007 Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Disabling the immobiliser on a 2007 Ford Mondeo mk4 can take just a few minutes of your time. To do this, switch on the ignition and access the Setti…
How to Disable the Immobiliser in a Ford Mondeo?
How to Disable the Immobiliser in a Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) To disable the immobiliser in a Ford Mondeo, connect a diagnostic tool to the vehicle's OBD port: this is located in the dashboard area immediately b…
How do you deactivate the immobilizer of the Ford Mondeo?
How do you deactivate the immobilizer of the Ford Mondeo?
Ford Mondeo / Fusion (2000-2007 / MK 2) The deactivation of the Ford Mondeo immobilizer can be done by connecting a diagnostic tool to the vehicle's OBD port: this port will be located imme…

    Frequently Asked Questions

    • Mondeo 2007-2014 - How to reset the inertia switch of the Ford Mondeo? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos