Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stereo from the Ford Mondeo Mk3

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Car stereo

If you own a Ford Mondeo Mk3 (2007-2014) and are wondering how to safely and correctly remove the factory stereo, follow these steps. First, turn off your Ford Mondeo and obtain some very thin hooks to insert into the four slots located at the corners of the radio. Once all four are inserted, gently pull towards you and disconnect the electrical cable at the back of the stereo. At this point, complete the removal of the radio, and the procedure is finished.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the factory radio on the Ford Mondeo
How to reset the factory radio on the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this guide, you will find the instructions to reset the factory radio on the Ford Mondeo. First, get in the car and turn on the ignition; then tur…
How to Remove the Centre Dashboard Panel on a Ford Mondeo
How to Remove the Centre Dashboard Panel on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Learn how to remove the centre dashboard panel along with the original radio on a Ford Mondeo. First, remove the radio using appropriate keys, then u…
How to Restore Factory Settings in the Ford Mondeo Radio?
How to Restore Factory Settings in the Ford Mondeo Radio?
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial, see how to restore factory settings in the Ford Mondeo radio, a very simple and quick operation to perform in case of malfunction. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos