Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Disassembly of the central dashboard on Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Air Vents
Operation: Disassembly of the central dashboard on Ford Focus

As shown in the video, use a small flathead screwdriver to remove the plastic underneath the radio button panel. At this point you can unscrew the two torx t20 screws present here. Already done! There were only these two screws to hold the central dashboard in place, on which the air vents are also fixed. While extracting it, remember to disconnect the rear connector concerning the push-button panel. For reassembly, all you have to do is, of course, proceed backwards. As you can see, this is a very simple operation and within the reach of even the less experienced.


Posted on 24 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos