Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulb on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight bulb

Before starting, open the front bonnet. Begin by disconnecting the connector attached to the headlamp. Once done, remove the plastic rivet and unscrew the screws securing the headlamp. At this point, you can take the headlamp out of its housing. This will give you the necessary space to remove the bulb cover. By removing the cover, you will expose the bulb. To take it out, rotate the connector counter-clockwise and pull it out. Pulling the connector will remove the bulb from its socket, and to completely disassemble it, simply disconnect the connector. To fit the new bulb, just follow the steps in reverse, and you will have successfully completed the replacement.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Ford Fiesta?
How to Replace the Front Headlight Bulb of the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the front headlight bulb of the Ford Fiesta, open the bonnet to access the headlight mounting screws located at the top and bottom. Once t…
How to Replace the Interior Light Bulb of a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the interior light bulb of a Ford Fiesta, use a tool to lever the light fitting out of its housing. Once the light fitting is removed, you…
How to Replace the Front Fog Light Bulb of the Ford Fiesta
How to Replace the Front Fog Light Bulb of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Below is the guide that will allow you to remove and replace the front fog light bulb of the Ford Fiesta. First, move to the front of the vehicle and…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos