Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace the headlight bulb on Ford Fiesta 6

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Headlight bulb
Operation: How to replace the headlight bulb on Ford Fiesta 6

If the headlight bulb of your Ford Fiesta sixth series (year 2008-2017) has suddenly stopped working and you want to find out how to replace it, then all you have to do is follow the steps described below. First, park your car safely and turn it off completely. At this point, lift the front hood and remove the protective cap located in the rear area of the headlight itself. Then disconnect the electrical pin present and then also remove the faulty bulb. Finally, fit the new bulb and the protective cap.


Posted on 21 May 2023 by ScegliAuto



How do you install the LED bulb on the Ford Fiesta headlight?
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) In order to install the LED bulb on the Ford Fiesta headlight, you need to open the hood and loosen the two screws that fix the headlight at the top.
How to replace the front headlight bulb of the Ford Fiesta 6.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) If you are wondering how to properly and independently replace the headlight bulb of your Ford Fiesta Mk6, then all you have to do is read the follow
How to replace the front headlight bulb of the Ford Fiesta.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Today we will explain how to replace the bulbs of the right and left front headlights on the Ford Fiesta. The first thing to do is to lift the front

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos