Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Position Bulb Replacement for Front Headlamp on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight bulb

In today's video, you will learn how to remove and replace the position bulb of the front headlamp on a Ford Fiesta from 2008 to 2017. First, open the bonnet and remove the front headlamp by unscrewing the securing screws located on the sides of the headlamp and on the bracket; then disconnect the connector found at the back of the headlamp. Once the headlamp is removed, take off the plastic cover of the bulbs; remove the bulb holder along with the bulb and replace it with the new one. Finally, reassemble everything as shown in the video!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the LED Bulb in the Front Headlamp of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To install the LED bulb in the front headlamp of the Ford Fiesta, open the bonnet and loosen the two screws securing the headlamp at the top. This wi…
How to Replace the Front Headlamp Bulb on a Ford Fiesta?
How to Replace the Front Headlamp Bulb on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the front headlamp bulb on a Ford Fiesta, start by opening the bonnet and locating the headlamp you wish to work on. Once identified, look…
How to Replace the Front Headlamp Bulb on the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If you are wondering how to correctly and independently replace the front headlamp bulb on your Ford Fiesta Mk6, just read this guide carefully and f…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos