Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the exhaust pipe of the Gilera Runner 125 by loosening the screws that fix the terminal to its housing, near the rear wheel on the right side of the motorcycle: once the exhaust pipe has been freed from the supports, it will be possible to proceed by widening the connecting clamp between the terminal and the collector. In this way, the new one can be inserted: this can now be connected to the collector and then fixed to the supports. By doing so, it will be possible to verify that everything works correctly.

Posted on 11 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Gilera Runner 125?
How do you replace the exhaust pipe of the Gilera Runner 125?
Runner 125 To replace the exhaust of the Gilera Runner 125, you need to loosen the fixing screws of the supports that hold the component in place, next to the r…
How to Replace the Exhaust on a Gilera Runner 125
How to Replace the Exhaust on a Gilera Runner 125
Runner 125 To replace the exhaust on a Gilera Runner 125, you need to unscrew the bolts that secure it at the top, connecting it to the rear of the bike. Once t…
Removing the Rear Wheel of a Gilera Runner 125
Runner 125 In this video tutorial, we will go through the steps to remove the rear wheel of a Gilera Runner 125, following the instructions below. First, remove…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos