Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we will go through all the instructions needed to remove the air filter box and the entire transmission system on a Gilera Runner 125 scooter. First, unscrew the outer screws of the air filter cover; once removed, extract the filter. Next, unscrew all the screws of the clutch cover using a socket spanner, and remove the fan by unscrewing the central nut; then remove the variator and the timing belt, followed by the clutch pack. Follow the video to the end for complete disassembly!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Overhaul and Installation of Variator on Gilera Runner 125 - Piaggio Typhoon
Overhaul and Installation of Variator on Gilera Runner 125 - Piaggio Typhoon
Runner 125 In this video tutorial, you will learn how to overhaul and install the variator and transmission components of a Gilera Runner 125 scooter. First, ch…
How to Replace the Transmission on a Gilera Runner 125
How to Replace the Transmission on a Gilera Runner 125
Runner 125 To replace the transmission on a Gilera Runner 125, loosen the screws securing the cover of the casing located near the rear wheel. Once the casing i…
How to replace the variator on a Gilera Runner 125?
How to replace the variator on a Gilera Runner 125?
Runner 125 To replace the variator on a Gilera Runner 125, loosen the bolts securing the cover at the rear of the bike, on the left side of the rear wheel. Once…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos