Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the clutch of the Harley Davidson Milwaukee by loosening the screws that secure the corresponding transmission housing: this will be located in the central lower part of the vehicle. Once the screws of the housing have been loosened, it will be possible to proceed by removing the underlying clutch discs that are located in their seat: in this way it will be possible to place the new ones in their respective housing. After installation, everything will need to be closed with the housing to verify correct operation after replacement.

Posted on 2 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Harley Davidson Milwaukee?
How to Change the Engine Oil of the Harley Davidson Milwaukee?
Milwaukee To change the engine oil on the Harley Davidson Milwaukee, unscrew the drain plug from the oil tank located in the lower central area of the vehicle.…
How do you replace the air filter on the Harley Davidson Milwaukee?
How do you replace the air filter on the Harley Davidson Milwaukee?
Milwaukee To replace the air filter of the Harley Davidson Milwaukee, you need to loosen the screws that secure the side panel in the motorcycle, immediately b…
How do you replace the muffler on a Harley Davidson Milwaukee?
How do you replace the muffler on a Harley Davidson Milwaukee?
Milwaukee To replace the exhaust of the Harley Davidson Milwaukee, you need to loosen the screws that secure it to its housing: this will be located near the r…

How to Replace the Rear Indicator Bulb on the Sym Mio

To replace the rear indicator bulb on the Sym Mio, you need to loosen the screws that secure the rear fairing of the motorcycle: to do this, you will also need to open the under-seat compartment and loosen the screws that secure the fairing from the inside. Once it is released, you can completely detach it and disconnect the connector attached to the corresponding bulb. The bulb can now be extracted from its housing, allowing you to insert the new one: this way, you can reassemble all the removed parts to ensure everything works correctly.

Watch the video!


by ScegliAuto

More videos