Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reposition the coil on your Harley Davidson Sportster, start by ensuring the motorcycle is stable and secure for maintenance work. Always keep safety precautions in mind when performing any maintenance on a motorcycle (or car). First, remove the fuel tank. Unscrew the bolts (as shown in the video) and disconnect the fuel line to the engine. Disconnect the spark plug leads from the two cylinders and unscrew the two bolts (located close together, as seen in the images, securing the components above the cylinders) that hold the metal plate where you will reposition the coil. Finally, tidy up the wiring (grouping the wires and securing them next to the frame tube) to complete the job!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Harley Davidson Sportster?
How to change the motor oil of a Harley Davidson Sportster?
Sportster To change the motor oil of a Harley Davidson Sportster, follow these steps. Start by positioning the motorcycle on a flat and stable surface, then se…
How to Change the Transmission Oil on Harley Davidson Sportster
How to Change the Transmission Oil on Harley Davidson Sportster
Sportster Today, see the instructions on how to change the transmission oil on a Harley Davidson Sportster motorcycle. First, place the bike on its stand and s…
How to replace the instrument cluster bulb on the Harley Davidson Sportster?
How to replace the instrument cluster bulb on the Harley Davidson Sportster?
Sportster To replace the instrument cluster bulb on the Harley Davidson Sportster, disconnect the corresponding connector located at the back of the instrument…

How to Replace the Drive Belt of the Piaggio Vespa 50 ET2

Today, we will discover the instructions that will allow us to dismantle and replace the drive belt of the Piaggio Vespa 50 ET2. First, place the scooter on the stand and start unscrewing all the fixing screws found on the side of the transmission cover to remove it; then unscrew the screw of the fan and the variator, subsequently removing the drive belt, as shown in the video. At this point, install the new toothed belt, as well as the original one, correctly refitting the fan and finally the side cover of the transmission.

Watch the video!


by ScegliAuto

More videos