Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, see the instructions on how to change the transmission oil on a Harley Davidson Sportster motorcycle. First, place the bike on its stand and start unscrewing the two screws of the transmission oil fill plug; then unscrew the oil drain screw located at the bottom using a socket spanner, as shown in the video. Once the old oil has drained, refill with the new transmission oil of the correct type and specifications; top up the correct amount and start the engine!

Posted on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Transmission Oil on the Harley Davidson Sportster
How to Change the Transmission Oil on the Harley Davidson Sportster
Sportster Here are the instructions for changing the transmission oil on the Harley Davidson Sportster. First, place the motorcycle on a stand and begin unscre…
How to replace the transmission oil in the Harley-Davidson Sportster?
How to replace the transmission oil in the Harley-Davidson Sportster?
Sportster In this tutorial, we will see how to replace the transmission oil in a Harley-Davidson Sportster, a very simple and quick operation. First of all, le…
How to Replace the Starter Motor of the Harley Davidson Sportster
How to Replace the Starter Motor of the Harley Davidson Sportster
Sportster Follow these steps to remove and replace the starter motor of the Harley Davidson Sportster. First, place your bike on a stand and begin by removing …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos