Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on Harley Davidson Sportster Iron 883

Model: Harley Davidson Sportster Iron 883
Part: Battery

Video tutorial

To access the battery on the Harley Davidson Sportster Iron 883, first remove the left side fairing shown in the video, followed by the seat (unscrewing the bolt with a washer). Remember to always disconnect the negative terminal first, then proceed to the positive terminal for electrical safety reasons.

When connecting the new battery, work in reverse order. Once the two terminals are disconnected, you can remove and extract the battery, insert the new one, and as mentioned, proceed in reverse until fully reassembled.

Good luck!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?
How to Replace the Battery in a Harley-Davidson Sportster Iron 883?
Sportster Iron 883 In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceedi…
How to replace the front headlight on a Harley-Davidson Sportster Iron 883?
How to replace the front headlight on a Harley-Davidson Sportster Iron 883?
Sportster Iron 883 This tutorial shows how to replace the front headlight on a Harley-Davidson Sportster Iron 883, a very simple and quick operation. First, ensure that…
How to Replace the Headlight on a Harley-Davidson Sportster Iron 883?
How to Replace the Headlight on a Harley-Davidson Sportster Iron 883?
Sportster Iron 883 In this tutorial, we will see how to replace the headlight on a Harley-Davidson Sportster Iron 883, an extremely simple and quick operation. First, e…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos