Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to change the engine oil in a Harley-Davidson Fat Bob, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down sufficiently, then position a container underneath it, locate the drain plug, and unscrew it. Allow all the oil in the system to drain out, then unscrew the filter located at the front of the engine and tighten the replacement. Reassemble everything and pour the new oil through the designated top hole.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Harley Davidson Fat Bob
How to Change the Engine Oil and Oil Filter on a Harley Davidson Fat Bob
Fat Bob .. the engine oil and oil filter on a Harley Davidson Fat Bob. First, place the motorcycle on a stand and begin to unscrew the oil drain bolt located.. …
How to replace the engine oil and oil filter of the Harley Davidson Fat Bob.
How to replace the engine oil and oil filter of the Harley Davidson Fat Bob.
Fat Bob .. the routine maintenance service on the Harley Davidson Fat Bob motorcycle. First, let's put the motorcycle on the stand and start unscrewing the oil.. …
Replacing the Battery on the Harley Davidson Fat Bob
Replacing the Battery on the Harley Davidson Fat Bob
Fat Bob .. removing and replacing the battery on the Harley Davidson Fat Bob. First, place the motorcycle on a stand and begin by removing the rider's and passenger's.. …

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos