Do it yourself
Frequently asked questions about cars and motorcycles
This guide will show you how to remove and replace the exhaust on a Moto Guzzi Griso, following the instructions below. First, place the motorcycle on a stand and begin to unscrew the fixing bolts of the exhaust silencer to remove it from the exhaust manifold. Then, unscrew the nuts from the cylinder head manifold if you also want to remove it. In this case, only the exhaust silencers are being replaced; secure them properly to the manifold using metal clamps or springs, following the video tutorial to the end!

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Griso To replace the exhaust on a Moto Guzzi Griso, loosen the bolts securing the exhaust at the rear left of the bike. The bolts that hold it in place wil…
Griso The replacement of the muffler installed on the Moto Guzzi Griso can be carried out by loosening the screws that secure the exhaust terminal to its h…
Griso This guide explains the procedure to remove and replace the clutch discs on a Moto Guzzi Griso 1200. To replace the clutch, you need to remove the en…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos