Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's guide will show you how to remove and replace the front brake pads on the Yamaha Xmax 125 scooter in simple and quick steps. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper; then remove the central locking pin for the brake pads to take them out of the caliper, as shown in the video. At this point, apply pressure to the caliper piston, cleaning off any residual dirt; then install the new original brake pads, reassembling the caliper!

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads on the Yamaha XMAX 125 scooter?
How to replace the front brake pads on the Yamaha XMAX 125 scooter?
Xmax 125 In this tutorial we can see how to replace the front brake pads on the Yamaha XMAX 125 scooter, an extremely simple and quick operation. First of all…
How to Replace the Battery in the Yamaha Xmax 125
How to Replace the Battery in the Yamaha Xmax 125
Xmax 125 The instructions in this guide will show you how to remove and replace the battery of the Yamaha Xmax 125 scooter. First, place the scooter on its st…
How to replace the engine oil of the Yamaha Xmax 125.
How to replace the engine oil of the Yamaha Xmax 125.
Xmax 125 Briefly, we will see the steps that will allow us to replace the engine oil of the Yamaha Xmax 125 scooter. First, we place the scooter on the center…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos