Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Es 700
Part:

To replace the front fairing of the GasGas ES 700, loosen the screws securing it from the inside, just below the steering wheel. Once the securing screws are loosened, you can completely detach it from its housing, disconnecting the underlying connectors as well. After removing the fairing, insert the new one, securing it with the appropriate screws and connecting the underlying connectors; once the fairing is secured, check that everything functions correctly.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the GasGas ES 700?
How to Replace the Exhaust on the GasGas ES 700?
Es 700 To replace the exhaust on the GasGas ES 700, loosen the screws securing the left side protection fairing of the bike, near the exhaust itself: once t…
How to Install the Luggage Rack on a Gasgas ES 700
How to Install the Luggage Rack on a Gasgas ES 700
Es 700 This guide shows how to install the rear luggage rack on the Gasgas ES 700 motorcycle, following the instructions below. First, place your motorcycle…
How to replace the exhaust of the GasGas ES 700?
How to replace the exhaust of the GasGas ES 700?
Es 700 To replace the exhaust on the GasGas ES 700, first loosen the screws securing the side protection panel of the exhaust, located on the right side of …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos