Do it yourself
| ||||
|
Model: Harley Davidson Tri Glide
In order to replace the battery of the Harley Davidson Tri Glide, you need to loosen the screws that fix the motorcycle seat to its housing, so that the seat can be completely removed: after removing the seat, it will be possible to access its underlying components. The battery can then be removed from its seat, disconnecting the power cables and loosening the screws that secure it: at this point it will be possible to insert the new battery into its housing, then secure the seat with the screws and check that everything works correctly.
Posted on 13 May 2024 by ScegliAuto
How do I replace the Harley Davidson Tri Glide air filter?
Tri Glide In order to replace the Harley Davidson Tri Glide air filter, you need to remove the chrome cover located in the upper part of the crankcase cover on |
How to change the bulb and dashboard of the Honda SH 150This guide shows the procedure for removing and replacing the bulb and dashboard for the 2013 Honda Sh 150 model. The Sh models up to 2016 are eligible for this job. For this procedure, the following steps must be performed: 1. Disassemble the visor by removing its 4 nuts; 2. Disassemble the 6 nuts of the side bezels, 3 for each, of which 4 of 6 are press fit, for the latter it is necessary to pay particular attention during removal; 3. Remove the 4 screws of the lower plastic cup, located under the handlebar; 4. Remove the remaining rubbers and front fairings not mentioned above and proceed with the removal of the bulb and, if necessary, with the replacement of the spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.211
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |