Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the oil in a Harley Davidson Low Rider St, start by lifting the bike onto a central stand or a ramp to ensure a stable position and easy access to the oil pan. Place a container under the oil drain plug to collect the used oil. Use an appropriate wrench to loosen the drain plug and let the oil drain completely. Once the oil has fully drained, reattach the drain plug and tighten it securely. Proceed to add the new oil through the fill opening, using a funnel to prevent spills. Make sure to use oil with the manufacturer's recommended specifications to ensure the best engine performance. After adding the oil, start the engine and let it run for a few minutes to allow the oil to circulate. Finally, check the oil level and add more oil if necessary.

Posted on 9 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Harley Davidson Low Rider S?
How do you replace the engine oil of the Harley Davidson Low Rider S?
Low Rider S In order to replace the engine oil of the Harley Davidson Low Rider S, you need to loosen the drain plug located at the bottom of the motorcycle: by …
How to replace the exhaust on the Harley Davidson Low Rider S?
How to replace the exhaust on the Harley Davidson Low Rider S?
Low Rider S To replace the exhaust on the Harley Davidson Low Rider S, loosen the screws that secure the exhaust terminal to its housing so that it can be remove…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos