Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Honda
  4. :
  5. Hr V
  6. : 1999-2005 (MK 1, GH)

Honda Hr V Years 1999-2005 (MK 1, GH)

Honda Hr V (1999-2005 / MK 1, GH)
What is the fuse diagram for the Honda HR-V?

If the devices in our Honda HR-V have suddenly stopped working, we can first check the status of the corresponding fuses, whose diagrams are indicated in this …read all…
Posted on 7 February 2024 by ScegliAuto
Honda Hr V (1999-2005 / MK 1, GH)
How to replace the fuel filter on the Honda HR-V

Let's see in this short guide the steps that will allow us to disassemble and replace the Honda HR-V petrol filter. First of all, we open the bonnet of our car …read all…
Posted on 18 December 2022 by ScegliAuto
Honda Hr V (1999-2005 / MK 1, GH)
How to replace the cabin filter in the Honda HR-V?

Replacing the passenger compartment filter of the Honda HR-V, as we can see in this tutorial, is an extremely simple and fast operation. First of all, let's go …read all…
Posted on 8 October 2022 by ScegliAuto
Honda Hr V (1999-2005 / MK 1, GH)
Removing the Honda HR-V external rearview mirror

In today's video tutorial we will see the guide that will allow us to remove and replace the exterior rearview mirror of the Honda HR-V. First of all, we open …read all…
Posted on 21 August 2022 by ScegliAuto
Honda Hr V (1999-2005 / MK 1, GH)
Removing the door panel on Honda Hr V

Does the left door panel of a Honda HR V need to be replaced? Let's see how it disassembles. We unscrew the screws placed in the space of the upper lever of …read all…
Posted on 5 December 2023 by ScegliAuto
Honda Hr V (1999-2005 / MK 1, GH)
Removing the door panel on Honda Hr V

Does the door panel of a Honda Hr V need to be replaced? Let's see how it disassembles. We unscrew the screws placed in the space of the upper lever of the …read all…
Posted on 5 December 2023 by ScegliAuto
Car stereo (5) Battery (3) Key (5) -board computer (6) Checks and maintenance (18) Tail light (1) Air filter (3) Cabin air filter (5) Petrol filter (1) Oil filter (1) Grille (1) Headlight bulb (2) Engine oil (3) Door panel (3) Brake pads (1) Tires (8) Fuel pump (1) Instrument cluster (12) Fuse box (6) Outside rearview mirror (3)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos