Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Hr V
    4. : Air filter

Honda Hr V - Air filter

Honda Hr V (2016-2022 / RU, MK 2)
How to replace air filter on honda hr v
If we want to replace the engine air filter on this car, the instructions and operating procedures to be followed are found in the description below. After …read all…
Posted on 7 June 2023 by ScegliAuto
Honda Hr V (2016-2022 / RU, MK 2)
How to replace the air filter on Honda Hr V
In order to replace the car air filter it is necessary to open the bonnet and locate the box containing the filter, located on the right side of the engine …read all…
Posted on 3 November 2022 by ScegliAuto
Honda Hr V (2016-2022 / RU, MK 2)
How to replace the air filter in a Honda HR V
In this video tutorial we can see how it is possible to replace the air filter in a Honda HR V, following some simple steps: the first thing to do is to buy a …read all…
Posted on 23 September 2022 by ScegliAuto
Car stereo (5) Battery (3) Key (5) -board computer (6) Checks and maintenance (18) Tail light (1) Air filter (3) Cabin air filter (5) Petrol filter (1) Oil filter (1) Grille (1) Headlight bulb (2) Engine oil (3) Door panel (3) Brake pads (1) Tires (8) Fuel pump (1) Instrument cluster (12) Fuse box (6) Outside rearview mirror (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos