Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust pipe installed on the Honda X-ADV, you need to loosen the screws that hold the exhaust terminal to its housing, located on the right side of the motorcycle, near the rear wheel. You will need to loosen the screws that secure the exhaust to its supports and widen the connecting clamp between the exhaust pipe and the collector: this way you will be able to insert the new replacement piece. At this point, you can secure the exhaust to the supports and connect it to the collector in order to verify that everything works.

Posted on 16 June 2025 by ScegliAuto

Video tutorial

Related tutorials

X Adv To replace the air filter on the Honda X-ADV, loosen the screws securing the protective panel of the filter box, located directly beneath the instrum…
X Adv This guide shows the location of the battery in the Honda X-ADV 750. To access the battery compartment, open the storage area under the seat and remo…
X Adv The battery of the Honda X-Adv is located inside the under-seat compartment of the motorcycle: to access it, you will need to lift the seat to reach …

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos