Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, see how to change the engine oil in a Husqvarna Svartpilen 401, a very simple and quick operation. First, ensure the engine is completely cold, then remove the lower cover, locate both drain hole bolts, and unscrew them using a socket spanner. Once all the oil has drained from the engine, refit the bolts, remove the filter housing cover, and replace the filter. At this point, you can reassemble everything and add the necessary amount of oil through the upper hole.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Svartpilen 401 In this tutorial, you will see how to change the engine oil in the Husqvarna Svartpilen 401, a very simple and quick operation. First, ensure that th…
Svartpilen 401 The engine oil replacement for the Husqvarna Svartpilen 401 can be performed by loosening the drain plug located at the central lower part of the veh…
Svartpilen 401 In this tutorial we can see how to replace the engine oil in the Husqvarna Svartpilen 401, an extremely simple and fast operation. First of all, make…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos