Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Husqvarna Svartpilen 401?

Model: Husqvarna Svartpilen 401
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Husqvarna Svartpilen 401, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then place a container underneath it, locate the bolts of the two drain holes and unscrew them using both an 18mm and a 13mm socket.

Next, remove the two secondary filters, clean them of any dirt residue, and wait for all the oil in the system to drain out. At this point, simply open the cap of the main filter with an 8mm socket, insert the replacement, reassemble everything, and pour in the required amount of oil through the designated upper hole.


Posted on 26 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Husqvarna Svartpilen 401?
How to Change the Engine Oil in a Husqvarna Svartpilen 401?
Svartpilen 401 In this tutorial, see how to change the engine oil in a Husqvarna Svartpilen 401, a very simple and quick operation. First, ensure the engine is comp…
How to Change the Engine Oil on a Husqvarna Svartpilen 401?
How to Change the Engine Oil on a Husqvarna Svartpilen 401?
Svartpilen 401 You can change the engine oil on the Husqvarna Svartpilen 401 by loosening the drain plug located at the central bottom of the vehicle: once the plug…
How do you change the engine oil of the Husqvarna Svartpilen 401?
How do you change the engine oil of the Husqvarna Svartpilen 401?
Svartpilen 401 The engine oil replacement for the Husqvarna Svartpilen 401 can be performed by loosening the drain plug located at the central lower part of the veh…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos