Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Husqvarna Svartpilen 401?

Model: Husqvarna Svartpilen 401
Part: Engine oil

Video tutorial

You can change the engine oil on the Husqvarna Svartpilen 401 by loosening the drain plug located at the central bottom of the vehicle: once the plug is removed, you can proceed to let all the oil flow into a suitably positioned container. When the oil has been expelled, you can remove the filter located in the same position to replace it with a new one: then you can proceed with topping up. The new oil should be poured in through the breather on the right side until the reservoir is filled.


Posted on 15 October 2026 by ScegliAuto


Related tutorials

How do you change the engine oil of the Husqvarna Svartpilen 401?
How do you change the engine oil of the Husqvarna Svartpilen 401?
Svartpilen 401 The engine oil replacement for the Husqvarna Svartpilen 401 can be performed by loosening the drain plug located at the central lower part of the veh…
How to Replace the Exhaust of the Husqvarna Svartpilen 401?
How to Replace the Exhaust of the Husqvarna Svartpilen 401?
Svartpilen 401 To replace the exhaust of the Husqvarna Svartpilen 401, loosen the bolts securing the exhaust end can to its supports, located near the rear wheel an…
How to Change the Engine Oil in a Husqvarna Svartpilen 401?
How to Change the Engine Oil in a Husqvarna Svartpilen 401?
Svartpilen 401 In this tutorial, see how to change the engine oil in a Husqvarna Svartpilen 401, a very simple and quick operation. First, ensure the engine is comp…

How to change the engine oil in the Yamaha TTR 125?

In this tutorial, see how to change the engine oil in the Yamaha TTR 125, a very simple and quick operation. Before doing this, wait for the engine to cool down sufficiently. Start by positioning a container under the bike, then locate the drain bolt and unscrew it using a socket spanner. Allow all the oil in the system to drain out, clean any residual dirt, and tighten the bolt. At this point, simply pour the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos