Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Ttr 125
Part: Engine oil

In this tutorial, see how to change the engine oil in the Yamaha TTR 125, a very simple and quick operation. Before doing this, wait for the engine to cool down sufficiently. Start by positioning a container under the bike, then locate the drain bolt and unscrew it using a socket spanner. Allow all the oil in the system to drain out, clean any residual dirt, and tighten the bolt. At this point, simply pour the required amount of oil through the designated upper hole.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Yamaha TTR 125?
How to Change the Engine Oil of the Yamaha TTR 125?
Ttr 125 You can change the engine oil of the Yamaha TTR 125 by loosening the drain plug of the oil sump, located at the central bottom of the bike. Once this…
How to Replace the Battery on a Yamaha TTR 125
How to Replace the Battery on a Yamaha TTR 125
Ttr 125 Today's guide will show you the steps to remove and replace the battery on the Yamaha TTR 125 enduro bike. First, place the bike on its stand and sta…
How do you replace the clutch of the Yamaha TTR 125LE?
How do you replace the clutch of the Yamaha TTR 125LE?
Ttr 125 In order to replace the clutch of the Yamaha TTR 125LE, you will need to loosen the screws that secure the special cover on the right side of the bik…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos