Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Ttr 125
Part: Battery

Today's guide will show you the steps to remove and replace the battery on the Yamaha TTR 125 enduro bike. First, place the bike on its stand and start unscrewing the screws securing the plastic side cover of the battery; then disconnect both battery terminals (positive and negative), remove the old battery, and replace it with the new one, as shown in the video. At this point, install and connect the new battery of the correct type and with the same amperage; finally, refit the plastic cover over the battery.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ttr 125 In this tutorial, see how to change the engine oil in the Yamaha TTR 125, a very simple and quick operation. Before doing this, wait for the engine t…
Ttr 125 You can change the engine oil of the Yamaha TTR 125 by loosening the drain plug of the oil sump, located at the central bottom of the bike. Once this…
Ttr 125 In order to replace the clutch of the Yamaha TTR 125LE, you will need to loosen the screws that secure the special cover on the right side of the bik…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos