Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Ttr 125
Part: Clutch

In order to replace the clutch of the Yamaha TTR 125LE, you will need to loosen the screws that secure the special cover on the right side of the bike, in the central lower area. Once the cover has been removed, you will be able to locate the clutch discs below. Now, you will need to loosen the screws that hold the discs in place so that they can all be removed. After removal, you can insert the new clutch into its place, securing all the discs and then covering everything with the cover to check its operation.

Posted on 15 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Yamaha TTR 125
How to Replace the Battery on a Yamaha TTR 125
Ttr 125 Today's guide will show you the steps to remove and replace the battery on the Yamaha TTR 125 enduro bike. First, place the bike on its stand and sta…
How to change the engine oil in the Yamaha TTR 125?
How to change the engine oil in the Yamaha TTR 125?
Ttr 125 In this tutorial, see how to change the engine oil in the Yamaha TTR 125, a very simple and quick operation. Before doing this, wait for the engine t…
How to Change the Engine Oil of the Yamaha TTR 125?
How to Change the Engine Oil of the Yamaha TTR 125?
Ttr 125 You can change the engine oil of the Yamaha TTR 125 by loosening the drain plug of the oil sump, located at the central bottom of the bike. Once this…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos