Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh 300
Part: Key

In this tutorial we can see how to replace the battery of the remote control of the Honda SH 300 scooter, an extremely simple and quick operation. To do this, we will only need a small screwdriver with a flat tip and a replacement battery of type CR2032. First of all, we locate the slot on the lower edge of the remote control, then we insert the screwdriver into it, pry and separate the two halves. We then remove the old battery, insert the replacement one respecting the polarity and reassemble everything following the reverse procedure.

Posted on 27 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the battery located on a Honda SH 300?
Where is the battery located on a Honda SH 300?
Sh 300 The battery of your Honda SH 300 powers the scooter's electrical system, including the starter motor when you need to start the engine. The battery i…
How to replace the battery of the Honda SH 300?
How to replace the battery of the Honda SH 300?
Sh 300 Briefly, we will see the procedure for removing and replacing the battery of the Honda SH 300 scooter. First, place the scooter on the centre stand a…
How to replace the battery in the Honda SH 300 scooter?
How to replace the battery in the Honda SH 300 scooter?
Sh 300 In this tutorial, we can see how to replace the battery in the Honda SH 300 scooter, an extremely simple and quick operation. First of all, make sure…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos