Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb on the Honda CB125F?

Model: Honda Cb 125f
Part: Headlight bulb

Video tutorial

In this tutorial we can see how to replace the headlight bulb in the Honda CB125F, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work in complete safety, then, with a cross-tip screwdriver, unscrew both the two screws on the sides of the instrument panel and the two screws below it. Then, grab the panel, separate it from the handlebar and remove the circular rubber cap. At this point, all that remains is to disconnect the connector, release the metal clip, replace the bulb and reassemble everything following the reverse procedure.


Posted on 10 October 2025 by ScegliAuto


Related tutorials

How to Reset the Service on the Honda CB125F?
How to Reset the Service on the Honda CB125F?
Cb 125f In this tutorial, you will see how to reset the service on the Honda CB125F, a very simple and quick operation that should only be performed after co…
How to adjust the time on the Honda CB125F?
How to adjust the time on the Honda CB125F?
Cb 125f In this tutorial, we can see how to adjust the time on the Honda CB125F, an extremely simple and quick operation to be carried out, for example, afte…
How to Change the Engine Oil in the Honda CB125F?
How to Change the Engine Oil in the Honda CB125F?
Cb 125f In this tutorial, you will see how to change the engine oil in the Honda CB125F, an extremely simple and quick operation. First, ensure that the engi…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos