Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Here are the instructions to replace the spark plug on the Honda SH Mode 125 scooter. First, place the scooter on the centre stand and begin removing the plastic fairing located at the bottom left, next to the oil filler cap; disconnect the spark plug coil wire, then use a socket spanner with an extension to remove it, as shown in the video. At this point, install the new spark plug of the correct type and with the same thread pitch, screwing it in by hand and tightening gently; reconnect the coil wire.

Posted on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Honda SH Mode 125 scooter?
How to adjust the time on the Honda SH Mode 125 scooter?
Sh Mode 125 In this tutorial we can see how to adjust the time on the Honda SH Mode 125 scooter, an extremely simple and quick operation, to be carried out for e…
How to Adjust the Time on the Honda SH Mode 125 Scooter?
How to Adjust the Time on the Honda SH Mode 125 Scooter?
Sh Mode 125 In this tutorial, we will see how to adjust the time on the Honda SH Mode 125 scooter, a very simple and quick operation, for example, after disconne…
How to Reset the Oil Service on the Honda SH Mode 125 Scooter?
How to Reset the Oil Service on the Honda SH Mode 125 Scooter?
Sh Mode 125 In this tutorial, you will see how to reset the oil service on the Honda SH Mode 125 scooter, a very simple and quick operation. Before proceeding, e…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos