Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The First Service at 1,000 Miles on the Honda SH 125

Model: Honda Sh 125i
Part: Checks and maintenance

Video tutorial

Let's see what needs to be done at the first service for the Honda SH 125 at 1,000 miles. First, change the oil (0.8 litres of original Honda 10W30 oil), clean the metal mesh filter, and reset the service light.

Place the scooter on its side stand to allow the oil to drain better, unscrew the drain bolt on the left side, clean the metal mesh filter, replace the sealing ring, unscrew the central bolt, wait for everything to drain, then refit the screws (tightening torque on the side 20 Nm, central 24 Nm); pour in the Honda oil, start the engine for 30 seconds (bike upright, not on the stand).

Turn off and wait 2 minutes.

Check the level and reset the light by pressing the SET+ button and ignition at the same time.


Posted on 13 November 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Honda SH 125
How to Reset the Oil Change Light on a Honda SH 125
Sh 125i The oil change service on the Honda SH 125 is performed for the first time after 625 miles and subsequently at 2,500, 3,750, 5,000, and 7,500 miles. …
How to reset the service on the Honda SH 125 scooter?
How to reset the service on the Honda SH 125 scooter?
Sh 125i In this tutorial, we can see how to reset the service on the Honda SH 125 scooter, an extremely simple and quick operation to be carried out only onc…
How to reset the service on the Honda SH 125 scooter?
How to reset the service on the Honda SH 125 scooter?
Sh 125i In this tutorial we can see how to reset the service on the Honda SH 125 scooter, an extremely simple and quick operation, to be carried out only onc…

The First Service at 1,000 Miles on the Honda SH 125

Let's see what needs to be done at the first service for the Honda SH 125 at 1,000 miles. First, change the oil (0.8 litres of original Honda 10W30 oil), clean the metal mesh filter, and reset the service light. Place the scooter on its side stand to allow the oil to drain better, unscrew the drain bolt on the left side, clean the metal mesh filter, replace the sealing ring, unscrew the central bolt, wait for everything to drain, then refit the screws (tightening torque on the side 20 Nm, central 24 Nm); pour in the Honda oil, start the engine for 30 seconds (bike upright, not on the stand). Turn off and wait 2 minutes. Check the level and reset the light by pressing the SET+ button and ignition at the same time.

Watch the video!


by ScegliAuto

More videos