Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Kawasaki KLX 110?

Model: Kawasaki Klx 110
Part: Engine oil

Video tutorial

To change the motor oil of a Kawasaki KLX 110, start by positioning the motorcycle on a flat and stable surface, making sure it is completely turned off and cooled down. Locate the oil drain plug, located under the engine, and place a container to collect the used oil. Use a wrench to loosen the drain plug and let the old oil drain completely.

Once finished, tighten the plug making sure it is secure. Remove the oil filler cap on the side of the engine and add the specified amount of new oil as stated in the motorcycle manual, using a funnel to avoid spills.

Finally, check the oil level with the dipstick or indicator, making sure it is correct, and start the engine for a few minutes to circulate the oil. Check for any leaks and turn off the engine to check the oil level again.


Posted on 28 December 2024 by ScegliAuto


Related tutorials

How to replace the engine oil in the Kawasaki KLX 110?
How to replace the engine oil in the Kawasaki KLX 110?
Klx 110 In this tutorial, we can see how to replace the engine oil in the Kawasaki KLX 110, an extremely simple and quick operation. First, let's make sure t…
How to Change the Engine Oil in the Kawasaki KLX 110?
How to Change the Engine Oil in the Kawasaki KLX 110?
Klx 110 In this tutorial, you will see how to change the engine oil in the Kawasaki KLX 110, a very simple and quick operation. First, wait until the engine …
How to Change the Engine Oil in a Kawasaki KLX 110
How to Change the Engine Oil in a Kawasaki KLX 110
Klx 110 In this tutorial, see how to change the engine oil in a Kawasaki KLX 110, a very simple and quick operation. First, ensure that the engine is cool en…

How to Replace the Front Headlamp of the Harley Davidson Street Glide

Today, we will provide step-by-step instructions to remove and replace the front headlamp of the Harley Davidson Street Glide. First, place the motorcycle on a stand and begin by removing the metal side frame by undoing the fixing screw; then remove the front optical unit by disconnecting the bulb's electrical connector, as shown in the video. At this point, install the new optical unit, checking its operation and making adjustments if necessary; finally, reattach the metal side frame.

Watch the video!


by ScegliAuto

More videos