Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Hornet
Part: Radiator

Today, you will learn how to remove the radiator from a Honda Hornet, in all available displacements. First, unscrew all the radiator mounting bolts using a socket spanner; then remove the fuel tank by disconnecting the fuel hose and the electrical connector, and remove the temperature sensor located on the sides. Next, remove the rubber hose, unscrewing the metal clamp, and take out the radiator, allowing all the fluid to drain. Refit the new one by applying the reverse procedure!

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of a Honda Hornet
How to Replace the Battery of a Honda Hornet
Hornet Before starting, place your Honda Hornet on the side stand. Begin by removing the left side fairing by unscrewing the fastening screws. Next, unscrew…
How to Replace the Engine Oil on a Honda Hornet 750?
How to Replace the Engine Oil on a Honda Hornet 750?
Hornet You can replace the engine oil on the Honda Hornet 750 by loosening the drain plug located at the central lower part of the vehicle: once removed, yo…
How to Replace the Exhaust on a Honda Hornet?
How to Replace the Exhaust on a Honda Hornet?
Hornet To replace the exhaust on a Honda Hornet, loosen the screws that secure the exhaust end can to its housing: once the screws securing the exhaust to t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos